Products

BAE series precision planetary gear units cover 7 frame sizes (42–235 mm) with ratios from 3:1 to 100:1. Backlash ≤3 arcmin (precision grade), single-stage efficiency ≥97%, rated output torque up to 2,000 Nm. Carburized 20CrMnTi gears (HRC 58–62), IP65 sealed housing, 20,000-hour design life. Direct motor flanges for IEC, NEMA, and major servo brands.

BAF series precision planetary gear units cover 7 frame sizes (42–235 mm) with ratios from 3:1 to 100:1. Backlash ≤5 arcmin (standard) or ≤3 arcmin (precision). Rated torque up to 1,500 Nm, single-stage efficiency ≥96%. Carburized 20CrMnTi gears (HRC 58–62), IP65 housing. Direct flanges for IEC, NEMA and major servo brands.

Raydafon BPG/BPGA precision planetary gear units share the same case-hardened and ground planetary gearing and differ only at the output interface. BPG uses a solid keyed output shaft for coupling, while BPGA uses a large output flange for direct bolt-on to driven equipment. Ratios cover 3:1 to 100:1, single-stage backlash is <3 arcmin, two-stage backlash is <5 arcmin, single-stage efficiency reaches up to 97%, and rated torque covers 25 Nm to 1000 Nm depending on frame size. Standard IEC motor flanges and hollow input shafts allow direct coupling to servo or stepper motors. Used in robotics, CNC machine tools, packaging and printing, automation, medical equipment and aerospace. OEM ratios, backlash, shafts, flanges and housings available.

Raydafon YE3 series AC induction motor is a three-phase asynchronous motor built to IE3 premium efficiency level. Frame sizes 80 to 180 cover 0.75 kW to 22 kW in 2-pole, 4-pole and 6-pole synchronous speeds. Standard voltage is 380V / 50Hz. The rotor uses high-precision low-noise bearings, the stator uses copper wire, and the laminations are low-loss silicon steel, so current draw and heat are lower than a standard IE1 motor at the same output power. Standard mounting configurations include IM B3 foot-mounted, IM B5 large flange, IM B14 small flange, IM B34 small flange + foot and IM B35 large flange + foot, all with IEC standard dimensions. Typical applications include woodworking machinery, cranes, construction machinery, compressors, conveyors, dredgers, rolling mills and industrial fans. OEM voltages, frequencies, shaft dimensions and nameplate branding are available.

YE2 Series AC Induction Motor is a totally enclosed fan-cooled (TEFC) squirrel cage three-phase asynchronous motor with IE2 high efficiency rating (equivalent to GB18613-2012 Grade 3 and IEC 60034-30 IE2). Available in frame sizes 80 to 355 with rated power from 0.75 kW to 375 kW across 2, 4, 6 and 8 pole configurations. Protection degree IP55, insulation class F with Class B temperature rise assessment, cooling method IC411, continuous duty S1. The stator uses 100% copper windings and the cast iron frame delivers rigid structural integrity in demanding industrial environments. Installation dimensions comply with IEC 72-1 and DIN 42673 standards. B3 foot mount, B5 flange mount, B14 face mount and B35 foot-flange combination are all supported. Suitable for pumps, fans, conveyors, compressors, machine tools, chemical equipment and mining applications. OEM customization on shaft dimensions, flange type, voltage and frequency.

Raydafon YS series AC induction motor is the entry tier of the three-phase asynchronous motor family. It uses low-noise bearings and a compact cast frame, designed for light-duty industrial equipment that does not need IE2 or IE3 efficiency. Rated power covers 0.06 to 2.2 kW across frames 56 to 90, in 2-pole, 4-pole and 6-pole synchronous speeds at 380V / 50Hz. Efficiency range is 56% to 81% and power factor range is 0.58 to 0.86 depending on pole count. Five IEC mounting configurations are available: IM B3 foot, IM B14 small flange, IM B34 small flange + foot, IM B5 large flange, and IM B35 large flange + foot. Typical uses include food packaging machinery, chemical equipment, woodworking machines, light cranes, metal rolling machine auxiliary axes, industrial fans and general light-duty drives.